Hi everyone, my Wrangler JL idles at 800 RPM without any noise after warming up. Then after about 7 to 8 minutes of idling, it automatically goes up to 1000 RPM, and there seems to be a thumping sound. I asked many places, and they said it's not knocking. Does anyone else have a similar issue with their Wrangler? Any explanation or help would be appreciated since there are no fault codes.
Comments( 4 )
Related Posts
Whose car idles at 1000 RPM when warming up, and has anyone fixed it?
T8 idling at 1000 RPM, what's going on?
Why is my S40 idling at 1000 RPM, and how can I bring it down?
4It's normal for your NV200 to have a high idle speed of 2000 RPM when you start it cold, and then drop to 800 RPM after about a minute. This process helps the engine warm up. However, if it feels inconvenient, you might want to consult a mechanic to see if any adjustments can be made.
5Is it normal for the Jeep Wrangler to have strong jerking sensations when starting right after warming up?
6Has anyone experienced idle running at 1000 RPM when the temperature is 35 degrees, and then it returns to normal at 800 RPM when the temperature is 26 degrees? What's going on? Please help.
7What could be causing the Luxgen M7 engine to make a knocking noise when cold, but not when warmed up?
8The engine takes 5 minutes to idle down after warming up. What could be the problem?
9Hello everyone, when I start my car cold, it makes a "dada" sound and the RPM goes up to over 1000, but it goes back to normal after about a minute. Is this normal?
10It's normal for the idle speed to fluctuate when you turn on the air conditioning in a 2013 1.6 manual fashion model. Sometimes the RPM might go up to around 900 or almost 1000, and other times it might be around 800. If you restart the engine and the RPM goes back to around 800, it's usually not a cause for concern.