avatar
حسن عبد القادر
2023-11-05 21:18

Taycan owners, I have a question about a feature. As you might know, in the Taycan's triple display, the middle one shows the speed by default, and when the power meter is checked, it shows acceleration and energy recovery levels—blue for acceleration and green for recovery. In my car, with the default set to normal mode, when I press the accelerator, the blue bar shows up normally. However, when I press the brake, the green bar doesn't show at all, although the car brakes fine. Does this mean my braking relies solely on mechanical brakes without energy recovery? Is there a way to set it so the green bar shows normally when braking? I'm sincerely asking for advice, thanks everyone!

Comments( 5 )

avatar
عبدالرحمن نعمان
عبدالرحمن نعمان2023-11-12 13:55
I have the same issue. The energy regeneration bar only moves when I release the accelerator during coasting. It doesn't move when braking for regeneration. Maybe the brake regeneration isn't displayed.
زبيدي أحمد
زبيدي أحمد2023-11-08 21:54
Bro, the regenerative braking isn't turned on, right? Turn it on using the button on the lower left of the steering wheel.
عمر بوتفليقة
عمر بوتفليقة2023-11-06 22:26
Your specification isn't normal; ask the 4S shop instead.
سلمان خليفة
سلمان خليفة2023-11-06 08:05
Try selecting the Sport+ mode. In that mode, releasing the accelerator will activate energy regeneration.
2 replies
نايف تامر
نايف تامر2023-11-06 06:08
When I first start driving, the brake green bar doesn't move. After driving for a while, it becomes normal.

fireIconRelated Posts

Top 1 Icon

Taycan owners, I have a question about a feature. As you might know, in the Taycan's triple display, the middle one shows the speed by default, and when the power meter is checked, it shows acceleration and energy recovery levels—blue for acceleration and green for recovery. In my car, with the default set to normal mode, when I press the accelerator, the blue bar shows up normally. However, when I press the brake, the green bar doesn't show at all, although the car brakes fine. Does this mean my braking relies solely on mechanical brakes without energy recovery? Is there a way to set it so the green bar shows normally when braking? I'm sincerely asking for advice, thanks everyone!

Top 1 Icon

Hi everyone, when I drive fast and press the brakes a bit hard, there's a thudding sound and the brake pedal feels like it's bouncing. This doesn't happen when I'm driving slowly or pressing the brakes lightly. Is this the ABS system kicking in or is it an issue with the brake pads? Also, regarding the temperature gauge on the dashboard, I remember it used to show two bars as soon as I started the car, right in the middle, but now it takes a few minutes to gradually rise half a bar at a time. Am I remembering wrong or is the coolant level low?

Top 1 Icon

Why does the Taycan revert to normal mode after changing the driving mode settings and getting back in the car?

4

When the fuel gauge still shows three bars short after filling up the tank until the pump stops, what could be the reason?

5

Is it normal for the brakes to apply themselves without pressing the accelerator while driving?

6

Is it normal that you can't accelerate when the tires are slipping?

7

Is it normal for the brake pedal of the Nissan X-Trail Classic to make a loud noise when it rebounds and contacts the brake light switch?

8

Is it normal to feel a jolt or a forward surge when shifting gears during acceleration?

9

Is it normal for the 2022 Kicks to shake when accelerating from a stop?

10

Is it possible to set the car to default to internal circulation instead of external circulation when starting?

Related Car

Porsche Porsche Taycan
Porsche TaycanAED 362,000 ~ 835,200Electric