I just bought a 2018 model 1.0 Passion Edition. Could anyone advise on the best spot to install the parking sensors? Most of the aftermarket sensors need to be at least 50 cm above the ground. The original ones are on the black plastic part and are quite low. So, I'm seeking advice from everyone. Thanks!
Comments( 1 )
Related Posts
To reset the tire pressure warning light, you typically need to follow these steps: 1. **Check Tire Pressure:** Make sure all your tires, including the spare, are inflated to the recommended pressure levels specified in your vehicle's manual. 2. **Drive the Vehicle:** Sometimes, driving the vehicle at a speed above 50 km/h (about 30 mph) for a few minutes can reset the warning light. 3. **Use the Reset Button:** Some vehicles have a TPMS reset button. Turn the ignition to the "on" position without starting the engine, then hold the reset button until the tire pressure light blinks three times. Release the button and start the vehicle. 4. **Consult the Manual:** Refer to your vehicle's manual for specific instructions, as the procedure can vary depending on the make and model. 5. **Professional Assistance:** If the light doesn't turn off, there might be a sensor issue or a need for recalibration, and you should consult a professional mechanic.
I just bought a 2018 model 1.0 Passion Edition. Could anyone advise on the best spot to install the parking sensors? Most of the aftermarket sensors need to be at least 50 cm above the ground. The original ones are on the black plastic part and are quite low. So, I'm seeking advice from everyone. Thanks!