How to replace the front wipers on a Mazda CX-30? Can anyone help?

Before replacing the wiper blades, quickly flick the wiper lever upwards twice after turning off the engine. This will stop the wipers in the maintenance position, directly above you, making replacement easier. Remember this tip. Also, prepare some towels to lay on the glass.

Taobao sells rubber wiper strips, seemingly Japanese-made. The rear ones don't need replacement for several years. The front two aren't expensive. Make sure not to replace the entire assembly; just buying the rubber strips is enough. Be careful when replacing them, and lay a towel on the front windshield.

Open the manual and go to Maintenance and Repair → User Maintenance → Wiper Blades. Follow these steps to replace the wiper blades. Follow these steps to move the wipers to the service position: a) Switch the ignition to the ON position. b) Switch the ignition to the OFF position. c) Within 30 seconds of switching the ignition to the OFF position, press the wiper switch up to the MIST position twice. (Note: When switching the ignition, do not press the brake or clutch, as this is not starting the vehicle.) After completing this step, the wipers will start working and then stop in the service position. Lift the wiper arm. (To avoid damaging the windshield, gently lower the wiper arm and do not let it drop onto the windshield with force.) Press the wiper arm tab and slide the blade assembly in the direction of the arrow to remove the blade assembly from the wiper arm.